Q7 Quattro V6-3.6L (BHK) (2007)
Compressor Pulley: Service and Repair
Belt Pulley - Version 2
Compressor Pulley
‹› A belt pulley is installed on compressors in a vehicle with 6 cyl. engine (compressor is driven via a shaft in vehicles with 8 cyl. engine).
‹› Different versions of the pulley are installed, depending on compressor construction type and engine version
Belt Pulley - Version 2
‹› Currently, compressor with belt pulley version "2" is installed in vehicles with 6 cyl. gasoline engine.
‹› Pulley, removing from compressor and re-installing
‹› Belt pulley version "2" is installed e.g. on compressor of "7 SEU 16" type.
1
Bolt
‹› Replacing
‹› Tightening torque 20 Nm
‹› Loosening and tightening
2
Drive plate
‹› Different versions