Q7 Quattro V6-3.6L (BHK) (2007)
‹› Only install a front A/C control head Climatronic Control Module (J255) - A - on which clips - C - (form-fitting clips with an angle of approx. 65°
) are installed on upper side and clips - B - on lower side, otherwise front A/C control head can only be removed again when the instrument panel
center section has been removed (clips - C - cannot be released on the lower side).
Install front A/C control head Climatronic Control Module (J255) (install in reverse order).
-
Perform basic setting, coding, adaptation (and output Diagnostic Test Mode (DTM) if necessary) on the A/C system.
-
Check DTC memory of front A/C control head Climatronic Control Module (J255) (and of Rear A/C Control Head (Climatronic) (E265), if
present) and erase DTCs displayed if necessary.