Q7 Quattro V6-3.6L (BHK) (2007)
Condensers - A - with flat tube dimensions - B - = 20 mm and - C - = 3.0 mm must be filled with more refrigerant than condensers - D - with flat tube
dimensions - E - = 18 mm or 16 mm and - F - = 1.7 mm Parts List.
Pay attention to flat tube dimensions on condenser replacement. If a condenser with different dimensions is to be installed, also replace label - A -
indicating refrigerant R134a capacity or delete old capacity and enter new figure using a waterproof pen Parts List.
Capacities for Audi Q7 (4L_) 2006 -->
Characteristics of refrigerant circuit:
-
Expansion valve
-
One or two evaporator(s)
-
Dryer cartridge in fluid reservoir on condenser
-
"Denso" compressor with A/C Compressor Regulator Valve N280