Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove CD Changer (R41) - F.
‹› Depending on equipment, a storage compartment or another component may be installed, removing.
-
Using two small screwdrivers - A -, disengage catches of both top clips - C - (above slots in instrument panel center section - D -), then grasp
under front A/C control head Climatronic Control Module (J255) - B - and carefully pull it out of center console.
-
Disengage catches of connector - D - by pressing retaining tabs - F - and disconnect this connector.
-
Wait 30 seconds (to protect electronics in front A/C control head Climatronic Control Module (J255)).
-
Disengage connector - E - and disconnect it.
-
Disengage catches of connectors - A - to - C - by pressing retaining tabs - F - and disconnect them.
‹› This illustration shows connectors on a front A/C control head Climatronic Control Module (J255) "Comfort" version with optional equipment
"heated seats". On the "Basic" version, connectors - A - and - C - are not present, on vehicles without "heated seats" as optional equipment,
connector - E - is not present.
Installing
-
Check clips - B - and - C - on front A/C control head Climatronic Control Module (J255).