Q7 Quattro V6-3.6L (BHK) (2007)
-
Press mirror glass - 1 - out of mirror adjusting unit - arrow - using pry lever (80 - 200).
-
Disconnect electrical connectors - 1 to 3 - on back side of mirror.
-
Remove screws - 1, 2, 4 -.
-
Pull housing - 3 - slightly away from cover - 6 - - arrow A - until retaining tabs - 5 - on cover are visible.
-
Remove housing upward - arrow B -.
-
Disconnect turn signal electrical connector and, if present, connector for Audi side assist warning light in side mirror.
-
Remove screws - 1, 2, 3, 5 -.