Q7 Quattro V6-3.6L (BHK) (2007)
/Page-1924002.png)
-
Remove fuses, relays or control modules.
-
Remove securing clip - 1 - from fuse holder.
-
Release securing clips - arrows - and remove plug-in socket - 3 - from mount - 2 -.
-
Remove connectors from plug-in socket.
‹› Precise assignment of relay and fuse carrier in plenum chamber electronics box can be seen from appropriate wiring diagram.
Installing
Install in reverse order of removal, observing the following:
-
Connect battery. Refer to => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery Disconnecting and
Reconnecting.
-
Adjust wiper arms. Refer to => [ Windshield Wiper Arms ] See: Wiper and Washer Systems/Wiper Arm/Adjustments.
Tightening Specifications
