Q7 Quattro V6-3.6L (BHK) (2007)
Coolant Line/Hose: Service and Repair
Left Coolant Pipe, Small
Left Coolant Pipe, Small
Special tools, testers and auxiliary items required
‹› Hose clamp pliers (V.A.G 1921)
Removing
‹› During installation, all cable ties must be reinstalled at the same location.
-
Drain coolant => [ Cooling System, Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
-
Disconnect coolant hose from - 1 - from connecting pieces.
‹› Ignore - arrows -.
-
Remove coolant hose - 2 - from connecting pieces and free up coolant hoses to intake manifold.
-
Move coolant houses forward.
‹› Ignore items - 1, 3 and arrows -.
-
Free up electrical connector - 1 - for Engine Speed (RPM) sensor (G28) on oil dipstick guide tube.