Q7 Quattro V6-3.6L (BHK) (2007)
-
Press sizing sleeve (T10133/8) over combustion chamber as far as stop on spacer sleeve (T10133/11) and remove again.
-
Install fuel injectors: cylinders 2, 4, 6 => [ Fuel Rail and Injectors, for Cylinders 2, 4 and 6 ] See: Fuel Rail and Injectors, for Cylinders 2, 4 and 6,
cylinders 1, 3, 5 => [ Fuel Rail and Injectors, for Cylinders 1, 3 and 5 ] See: Fuel Rail and Injectors, for Cylinders 1, 3 and 5.
Support Ring, Replacing
-
Remove O-ring - 3 -.
-
Cut off support ring - 2 - and remove.
-
Remove spring element - 1 -.
-
Slide on locking plate (T10133/12) instead of spring element.