Q7 Quattro V6-3.6L (BHK) (2007)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor 1
Fuel Level Sensor 1
Special tools, testers and auxiliary items required
‹› Wrench (T10202)
Removing
Observe safety precautions => [ Safety Precautions ] See: Service Precautions/Vehicle Damage Warnings/Safety Precautions/Fuel Supply.
Observe rules for cleanliness => [ Clean Working Conditions ] See: Service Precautions/Vehicle Damage Warnings/Clean Working Conditions/Fuel
Supply.
-
Position driver's seat as far back and up as possible using full seat adjustment range.
CAUTION!
Risk of destroying electrical components when battery is disconnected.
‹› Observe measures when disconnecting battery.
-
Disconnect battery.
CAUTION!
Danger of fuel entering vehicle interior.
‹› To remove fuel level sensor (G), fuel tank must be empty.
-
Empty fuel tank. Procedure: => [ Fuel Tank, Emptying ] See: Service and Repair/Procedures.
-
Remove right seat frame in 2nd row.
CAUTION!
Risk of injury.
‹› Wear protective gloves!
-
Cut floor covering at right with a standard box cutter - 1 - along perforation - arrows -.
-
Fold carpet cut-out to side - arrow -.