Q7 Quattro V6-3.6L (BHK) (2007)
Seat Belt: Service and Repair
Center Second Row Three-Point Seat Belt
Center Second Row Three-Point Seat Belt
Special tools, testers and auxiliary items required
‹› Special pop rivet pliers (V.A.G 1753A)
Removing
CAUTION!
Observe safety precautions for work on airbags refer to => [ Airbags ] See: Air Bag Systems/Service and Repair/Removal and
Replacement/Airbags.
-
Remove the bench seat (two-thirds bench) refer to => [ Bench Seat, Second Row ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Second Row, 3-Seater.
CAUTION!
Ensure backrest is engaged (zero position), otherwise it can tip forward uncontrolled.
-
Remove screw - 2 - for belt anchor/belt webbing - 3 - at seat frame, noting rubber disc - 1 -.
-
Remove cover and upholstery from backrest refer to => [ Backrest Cushion and Upholstery ] See: Body and Frame/Seats/Service and
Repair/Overhaul/Seats - Upholstery, Covers/2ND Row Seat/Second Row Two-Thirds Bench Seat without Center Seat, Cushion and Upholstery.
-
Remove pop rivets - A - that secure seat belt cover - B -. Do this by drilling out pop rivet heads.