Q7 Quattro V6-3.6L (BHK) (2007)
Steering Mounted Controls Assembly: Service and Repair
Multifunction Buttons
Multifunction Buttons
-
Switch off all electrical consumers.
-
Remove ignition key.
Removing
-
Remove driver's airbag Removal and Installation.
-
Disconnect trim ring from steering wheel.
-
Disconnect harness connector - 1 - at button - 2 -.
-
Slide button - 2 - out of steering wheel in direction of arrow.
-
Turn button around.
-
Disconnect harness connector - 2 - to Tiptronic switch from multifunction button - 1 - and remove button.
Installing
-
Install in reverse order of removal.
Removal and installation of left multifunction button is identical.