Q7 Quattro V6-3.6L (BHK) (2007)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley With Freewheel, Removing and Installing - I
Ribbed Belt Pulley With Freewheel, Removing And Installing
Special tools, testers and auxiliary items required
-
Multi-point adapter 3400
-
8 mm hex socket or TORX T50
Removing
-
If present, press the protective cap off the generator pulley.
-
Counter pulley with Multi-Tooth Adapter 3400 and turn generator shaft clockwise to loosen.
Installing
Install in reverse order of removal, observing the following:
-
Turn the generator shaft counterclockwise to tighten.
-
Clip protective cap onto generator pulley.
Tightening torque
Ribbed belt pulley with freewheel to generator: 80 Nm