Q7 Quattro V6-3.6L (BHK) (2007)
‹› For easier removal of wire clip, use silicon-free lubricating spray.
-
Release retaining clip - arrow A - and remove main fuse carrier cover - 1 - - arrow B -.
-
Disconnect electrical connector - 1 - on Battery Interrupt Igniter (N253).
-
Remove nuts - 2, 3, 6 -
-
Identify allocation of electrical wires - 7 to 11 - and remove nuts.
-
Remove electrical wires.
-
Remove relay and disengage relay carrier - 5 -.
-
Cut cable ties - arrows - and free up electrical wiring.
-
Pry out wire clip - 4 -.
‹› For easier removal of wire clip, use silicon-free lubricating spray.
-
Remove nuts - arrows -.