Q7 Quattro V6-3.6L (BHK) (2007)
-
Disconnect electrical connectors - 1 - and - 2 -.
-
Remove mount - 3 - with control modules up out of brackets.
-
Release securing clips - arrows - and remove control module - 3 - as far as stop. If necessary, release securing clips again and remove control
module from mount.
-
Press retaining clip - 2 - to side and remove Vehicle Electrical System Control Module 2 (J520) - item 1 - from mount.
Installing
Install in reverse order of removal, observing the following:
-
The new vehicle electrical system control module 2 (J520) must be coded in "Guided Fault Finding" or in "Guided Functions".
-
Select the function or path: