Q7 Quattro V6-3.6L (BHK) (2007)
Start / Stop Switch: Service and Repair
Access/Start Authorization Button E408, Removing and Installing
Access/Start Authorization Button E408, Removing And Installing
Removing
-
Position selector lever in "N" position.
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Unclip selector lever boot retaining frame - 1 - from center console and raise it up - arrows -.
-
Draw selector lever boot upward.
-
Release retaining spring - 2 - and remove Selector Lever Transmission Range (TR) Position Display Y26 - item 1 - upward.
-
Disconnect connector.
Vehicles without CD changer in center console storage compartment: