Q7 Quattro V6-3.6L (BHK) (2007)
‹› Conical pin must be free of grease and oil.
‹› If necessary, clean using dry rag, do not use cleaning agents.
22
Bolt
‹› Always replace after removal.
23
Nut, 110 Nm
‹› Self-locking
‹› Always replace after removal.
24
Nut, 30 Nm
‹› Self-locking
‹› Always replace after removal.
25
Suspension Strut
‹› Removal and installation, refer to => [ Coil Spring Suspension Strut ] See: Suspension Strut / Shock Absorber/Service and
Repair/Overhaul/Front Suspension/Coil Spring Suspension Strut.
‹› When removing, leave mounting bracket on vehicle.
26
Nut, 7 Nm
‹› Self-locking
27
Upper Control Arm
‹› Removal and installation, refer to => [ Upper Control Arm ] See: Control Arm/Service and Repair/Front Suspension/Upper Control Arm.
‹› Conical pin must be free of grease and oil.
‹› If necessary, clean using dry rag, do not use cleaning agents.
28
Bolt
‹› Always replace after removal.
29
Bolt
‹› Always replace after removal.
30
Nut, 50 Nm + 90°
‹› Self-locking
‹› Always replace after removal.