Q7 Quattro V6-3.6L (BHK) (2007)
Air Spring: Removal and Replacement
Air Suspension Strut, Upper Control Arm and Level Control System Sensor Assembly Overview
Air Suspension Strut, Upper Control Arm and Level Control System Sensor Assembly Overview
1
Bolt, 50 Nm + 90°
‹› Always replace after removal.
2
Suspension Strut (Air Suspension)
‹› Removal and installation, refer to => [ Air Suspension Strut ] See: Suspension Strut / Shock Absorber/Service and Repair/Overhaul/Front
Suspension/Air Suspension Strut.
3
Securing Clip
4
Bolt, 50 Nm + 90°
‹› Always replace after removal.
5
Bolt, 5 Nm
6
Level Control System Sensors (G78)/ (G289)
‹› Removal and installation, refer to => [ Left Front Level Control System Sensor and Right Front Level Control Sensor ] See: Suspension
Control Pressure Sensor/Switch/Service and Repair.
7
Bolt