Q7 Quattro V6-3.6L (BHK) (2007)
If residual pressure retaining valve sticks, the vehicle must be on a hoist and the wheels must rotate freely in order to replace the valve. Wheels must
not be compressed with empty boot under any circumstances!
Gaskets and Seals
Always replace gaskets and boot.
After removing seals, check sealing surfaces on housings for burrs and damage.
Bolts and Nuts
‹› Loosen and tighten the bolts and nuts of covers and housings in a diagonal sequence.
‹› Torque specifications for unoiled bolts and nuts are given.