Q7 Quattro V6-3.6L (BHK) (2007)
Suspension Strut / Shock Absorber: Overhaul
Coil Spring Suspension Strut
Coil Spring Suspension Strut
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
‹› Wood block (hardwood) 30 x 50 x 1300 mm
Removing
-
With vehicles with air suspension, place vehicle on hoist. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Service and
Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Remove wheel.
-
Remove suspension strut - arrows -.
-
Insert wood block between underbody - arrow A - and rear upper control arm - arrow B -.
Wood block is needed to press wheel bearing housing down.
-
Remove nut from bolt - arrow -