Q7 Quattro V6-3.6L (BHK) (2007)
/Page-3688003.png)
-
Lower wheel bearing housing.
-
Remove (V.A.G 1383 A) under vehicle.
-
Remove (T10149).
-
Tighten the connecting piece - 1 - at the residual pressure retaining valve - 2 - to 10 Nm using a (T10212).
-
Install wheel and tighten.
-
Air suspension system, filling, refer to => [ System, Venting or Filling ] See: Steering and Suspension/Suspension/Suspension Control ( Automatic
- Electronic )/Service and Repair/System, Venting or Filling.
