Q7 Quattro V6-3.6L (BHK) (2007)
Seals and Gaskets: Service and Repair
Rear Output Flange and Driveshaft Seal, Transfer Case Installing
Rear Output Flange and Driveshaft Seal, Transfer Case Installing
Special tools, testers and auxiliary items required
‹› Slide hammer (VW 771)
‹› Pulling hook (VW 771/37)
‹› Retainer (3145)
‹› Torque Wrench (V.A.G 1332)
‹› Torque Wrench (V.A.G 1601)
‹› Thrust piece (T40115)
‹› Socket SW 30
‹› Sealing grease (G 052 128 A1)
‹› 2 Bolts M10 • 25
‹› Counterhold tool (T10172) with adapters (T10172/6)
Removing
-
Remove bolts - 1 - from the transfer case/rear driveshaft connection.
-
Use the counterhold tool (T10172) with the adapters (T10172/6) to do this.
-
Tie up driveshaft to body.
-
Remove rear output flange/driveshaft nut.