Q7 Quattro V6-3.6L (BHK) (2007)
Seals and Gaskets: Service and Repair
Front Driveshaft Output Flange on Transfer Case, Seal, Replacing
Front driveshaft output flange on transfer case, seal, replacing
^
Transfer case installed
Special tools, testers and auxiliary items required
^
Thrust piece T40114
^
Engine/transmission jack V.A.G 1383 A
^
Old oil collecting and extracting device V.A.G 1782
^
Sealing grease G 052 128 A1
Removing
-
On vehicles with air suspension, activate vehicle lifting mode.
-
Raise vehicle.