Q7 Quattro V8-4.2L (BAR) (2008)
-
Insert new seals - D - on to coolant pipe connections - F -.
-
Push both coolant pipes - B - and - C - into heater core connections - E -.
-
Insert retaining clips - A - on proper side on to coolant lines - B - and - C - and heater core connections.
‹› Only use retaining clips of standard used in series production
-
Check retaining clips - A - on coolant pipes and heater core connections again for secure fit.
-
Re-install both left and right covers on heater core and the remaining removed components in reverse order.
-
Install front heating & A/C unit => [ Front HVAC Unit ] See: Housing Assembly HVAC/Service and Repair/Front HVAC Unit