Q7 Quattro V8-4.2L (BAR) (2008)
Navigation Module: Service and Repair
Navigation System With CD Drive Control Module Bracket
Navigation System With CD Drive Control Module Bracket
-
Switch off all electrical consumers.
-
Remove ignition key.
Removing
-
Remove right luggage compartment side trim.
-
Unclip the Towing Recognition Control Module J345 - 1 - and swivel aside.
-
Remove bolt - 2 - (2 Nm).
-
Remove nuts - arrows - (4 Nm).
-
If present, remove Level Control System Control Module J197.
-
Disconnect harness connectors to Navigation System with CD Drive Control Module J401.
-
Attach the protective cap for cable connector VAS 6223/9 - 1 - onto the harness connector of the MOST Bus - 2 -.
-
Remove bracket.
Installing
-
Install in reverse order of removal.