Q7 Quattro V8-4.2L (BAR) (2008)
-
Remove bolt - 4 - and nuts - 2 - and - 6 -.
-
Using a long wrench - 5 -, remove nut - 1 - at rear of control module bracket - 3 -.
-
Remove control module bracket.
All:
-
Detach relays or control modules and then unclip appropriate plug-in socket.
-
Release retaining clips - arrows - and press fuse holders - 1, 2, 4 - back out of relay and fuse carrier.
-
Remove nuts - 3 - and - 5 - and remove relay and fuse carrier.
Vehicles without bracket for control modules:
-
Remove nut - 6 -.