Q7 Quattro V8-4.2L (BAR) (2008)
1. Check for tight fit of the 10-way plug (Figure 1, Point 1) in the headlights by pulling gently.
2 If the connection is loose, check the plugs for bent, widened or pressed-back pins. Fix any damage.
3. Firmly slot the plug in the connector. Ensure there is no tension from the wiring harness (Figure 2, Point 2) on the 10-way plug.
4. If necessary, retighten the wiring harness to relieve tension on the plug.
WARRANTY
ADDITIONAL INFORMATION
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.