Q7 Quattro V8-4.2L (BAR) (2008)
Install in reverse order of removal, observing the following:
-
Check whether all rubber bushings - 2 - are seated correctly in mounts on wiper frame - 1 -, press into mounts if necessary.
-
Insert wiper motor with wiper frame into vehicle.
-
Next, hand-tighten screws and then tighten to torque specification in - 1 to 4 - sequence.
-
Tighten screws - arrows - on center partition panel.
-
Adjust wiper arms.
Tightening torques