R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Control Module: Service and Repair
Selector Lever Sensor System Control Module, R Tronic
Selector Lever Sensor System Control Module, R Tronic
Removing
-
Remove shift mechanism. Refer to => [ Selector Mechanism, R Tronic ] See: Transmission and Drivetrain/Manual Transmission/Transaxle/Shifter
M/T/Service and Repair/Removal and Installation/Selector Mechanism, R Tronic.
-
Disconnect the three electrical connectors to the Selector Lever Sensor System Control Module (J587).
‹› Disconnect the electrical connector - 5 - to the Transmission Control Module (J217).
‹› Electrical connector - 6 - to the Sport Program Button (E541)
‹› Electrical connector - 7 - to the Selector Lever Transmission Range Display (Y5)