RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Trim Panel: Service and Repair
Foot Rest Holder, Removing and Installing
Foot Rest Holder, Removing and Installing
Removing
-
Remove foot rest.
-
Fold back floor covering in area of foot rest holder - 4 -.
-
Remove nuts - 5 - (3x).
-
Tightening torque 4 Nm
-
Remove foot rest holder - 4 -.
Installing
-
Ensure that snap-on nut - 3 - is installed to foot rest holder - 4 -.