RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Trim Panel: Service and Repair
Emergency Triangle Bracket
Emergency Triangle Bracket
Installing or Retrofitting
-
Remove the rear lid trim.
There are opening stamped onto the back of the trim for installing the warning triangle bracket.
-
Use workshop clamping brackets - arrows - on the trim.
-
Secure the clamping bracket - 1 - to the hole in the rear lid - arrows -.
-
Remove the upper part of the clamping bracket.
-
Push the lower part of the clamping bracket - 3 - from behind through the slots in the trim - 2 - and lock the upper and lower parts.
-
Install the trim.
-
Attach the clamping bracket with screws - 4 - to the retainer.