RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
CAUTION!
Cylinder head gasket must not be kinked. A kinked cylinder head gasket must be replaced.
-
Lightly coat the sealing surfaces of the cylinder head gaskets, top and bottom, with sealant. While doing this slightly bend the cylinder head
gaskets downward - arrows -.
-
Use a flat object, e.g. a feeler gauge, to coat surfaces between cylinder head and gasket.
-
Apply sealant beads - 1 to 9 - on clean sealing surfaces of lower timing chain cover, as shown in illustration.