RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› Thickness of sealant beads: 2.5 mm.
‹› Covers for timing chain must be installed within 5 minutes after applying sealant.
‹› Replace the M6 bolts - 1, 3, 5, 6, 7, 11, 12 and 13 -.
‹› Replace the bolts - arrows - that connect the timing chain lower cover to the cylinder head.
-
Set the timing chain lower cover in place, guiding it at an angle from below onto cylinder block sealing surface and cylinder head.