RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
The following exchangeable heads are available for the Crimping Pliers (Base Tool) (VAS 1978/1-2):
‹› Exchangeable Head, 0.35-2.5mm (VAS 1978/1-1)
‹› Exchangeable head, 4.0-6.0 mm² (VAS 1978/2 A )
-
Slide crimp connection on to both stripped wire ends of vehicle-specific single wire and crimp them using crimp pliers.
‹› Do not crimp wire insulation.
After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.