RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove front wheels.
-
Loosen suspension strut/control arm threaded connection (only on left side of vehicle)
-
Position suspension strut - 1 - in front of control arm - 2 - as seen in direction of travel.
-
Loosen nut - 1 -, remove hex head bolt and remove both control arms - 2 - upward (only on left side of vehicle).
The slits in the wheel bearing housing must not be widened using a chisel or similar tool!
-
Remove hex head bolt - 3 - and remove threaded connection - 4 -.