RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Pry out clips.
-
Disengage electrical line
-
Remove plastic cover
-
On 6- and 8-cylinder engines, shield on driver side must be removed. Refer to => [ Shield ] See: Shield.
‹› In order to remove shield on driver side with 6-cylinder engines, front catalytic converter must be removed.
‹› In order to remove shield on driver side with 8-cylinder engines, front exhaust pipe must be removed.
-
Loosen bolt - 1 - approximately one turn
-
Remove bolts - 2 - and - 3 -
-
Swing steering gear on driver side forward in direction of travel
-
Place a pan underneath to catch hydraulic oil.
-
Remove return line banjo bolt (22 mm AF) from steering gear.