RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Steering Gear: Testing and Inspection
Servotronic Voltage Supply, Checking
Servotronic voltage supply, checking
-
Remove driver side storage compartment.
-
Remove Servotronic Control Module J236, item 2.
-
Switch on ignition
-
Set digital multimeter V.A.G 1526 on voltage measurement area up to 20 Volt.
-
Measure control module connector between contacts 6 and 8.
Specification: approx. 12 Volt.
-
If specified value is not reached, check electrical lines.