RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Steering Gear: Testing and Inspection
Speed Signal, Checking
Speed signal, checking
Speed signal comes from Instrument Cluster Control Module J285.
-
Remove driver side storage compartment.
-
Remove Servotronic Control Module J236, item 2.
-
If voltage supply, Servotronic Solenoid Valve and speed display on tachometer are OK, check electrical line between Servotronic Control Module
J236 contact 4 and Instrument Cluster Control Module J285.
-
If electrical line between contact 4 and Instrument Cluster Control Module J285 is OK, replace Servotronic Control Module J236.