RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
^
The marking "Transmission end" (transmission side), if provided, faces towards pressure plate/transmission.
^
Coil springs (damper assembly) point towards pressure plate and transmission
^
Centralizing
^
Clutch plate diameter Code letters, assignment of mechanical units, transmission ratios, capacities
5 - SAC pressure plate
^
Resetting adjuster ring
^
Check ends of diaphragm spring
^
Check that pressure plate is not distorted
^
Check spring connection and rivets
6 - Bolt, 22 Nm
^
Observe instructions for installation
Checking ends of diaphragm spring
^
Wear up to half the thickness of the diaphragm spring is permitted.
Note:
^
Important: When performing repairs, always select the correct clutch pressure plate and clutch plate by checking engine code.
Checking spring connection and rivet
-
Check spring connections - arrows A - for damage and make sure riveted fastenings - arrows B - are seated tightly.
Note:
^
Replace pressure plate if spring connections are broken or badly bent, or if riveted fastenings are loose.