RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1512002.png)
Constant velocity joints are packed with grease G 000 603:
Grease joint again when replacing protective joint boot.
1 - Cover
^
Carefully drive off using a drift
^
Always replace
^
Coat sealing surface with D 454 300 A2 before installing on constant velocity joint
^
Align cover to screw holes
2 - Circlip
^
Remove and install with commercially-available circlip pliers
^
Always replace
3 - Inner constant velocity joint
^
Exterior diameter: 100 mm
^
Replace only as a unit
^
Pressing off