S4 V8-4.2L (BHF) (2004)
-
Tighten hex bolts - 3 - for track control links
-
Tighten hex bolts for guide links.
-
Fasten connecting link - 4 - to stabilizer bar.
-
Secure suspension strut to track control link.
-
Install tunnel crossmember if necessary.
-
Tighten bolt - 5 - for ABS speed sensor.
-
Secure brake caliper to wheel bearing housing Brake system.
-
Install wheels and tighten.
Convertible only
-
Install front diagonal brace.
Continued for all vehicles
Note:
^
If the subframe has been located to the body with drift 3393 prior to removal and assembly (before tightening the bolts), wheel alignment may
not be necessary.
^
If the subframe was not located, you must perform a wheel alignment.
-
Perform wheel alignment.
Wheel alignment must be performed on wheel alignment equipment recommended by Audi.