S4 V8-4.2L (BHF) (2004)
/Page-1188002.png)
-
Remove hose clamps - 1 - and disconnect coolant hose.
Note: Disregard - item 2 -.
-
Disconnect coolant hose - 3 - on Generator.
-
Disconnect electrical harness connector - 1 -.
-
Remove electrical wire - 2 - from Generator.
-
Remove bolts - arrows -.
Note:
^
If Generator is stuck in its bracket, screw in mounting bolt again up to 2 turns.
^
Carefully strike on bolt heads using flat side of hammer - doing this loosens threaded sleeves of Generator mount.
-
Remove Generator.