S4 V8-4.2L (BHF) (2004)
/Page-1188005.png)
-
Remove bolts and remove oil pipes - 1 - and - 2 -.
-
Remove bolts - 1 to 7 - for upper section of oil pan.
-
Press oil pan (upper part) off of cylinder block roll pins.
Installing
Note: Replace seals and O-rings.
-
Using rotating plastic brush, remove any remaining sealant from oil pan (upper part) and at cylinder block.
CAUTION: Wear protective glasses.
-
Clean sealing surfaces so they are completely free of oil or grease.
