S4 V8-4.2L (BHF) (2004)
Fuel Gauge Sender: Component Locations
Fuel Tank With Attachments - Component Overview
Fuel Tank With Attachments - Component Overview
1. Bolt M8 x 28 with permanent washer -
-
Tighten to 23 Nm
2. Mounting clip
-
For heat shield
-
Check for secure seating
3. Heat shield
-
For fuel tank
4. Carrier plate
5. Tension strap
-
Note installed position
6. Fuel return line
-
From engine
-
Mark before removing
-
Note direction of arrow on connector flange
-
Clipped in on fuel tank, at right front
7. Vent line
-
Front end
-
To Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
-
Clipped in at top of fuel tank
-
Remains on fuel tank when fuel tank is removed
8. Fuel supply line
-
From fuel filter
-
To fuel rail
-
Mark before removing
-
Note direction of arrow on connector flange
-
Clipped in on fuel tank, at right front