S4 V8-4.2L (BHF) (2004)
-
Remove rear seat bench
-
Unbolt cover for left locking flange - arrows -.
-
Disconnect electrical harness connector - arrow - at left locking flange.
CAUTION: The fuel system is under pressure. Before opening system, place rags around the connection area. Then release pressure by carefully
loosening the connection.
-
Pull fuel line - arrow - off from left locking flange, by pressing release button.
CAUTION: The fuel level sensor 2 G169 may only be removed when fuel tank is maximum 1/4 full. Otherwise, a large amount of fuel will spill
out.