S4 V8-4.2L (BHF) (2004)
![background image](/audi/s4/v8-4.2l_(bhf)/Page-1724003.png)
-
Check the DTC memory after connecting each control unit.
-
Replace the control unit following installation of which the malfunction is displayed again.
If the malfunction in the CAN-Bus comfort system is still displayed, there is a problem with the Instrument Cluster Control Module J285 or the Steering
Column Electronic Systems Control Module J527.
-
Disconnect the Steering Column Electronic Systems Control Module J527 and connect a different control module (e.g. operating and display
module, Climatronic Control Module J255).
-
Check DTC memory of Instrument Cluster Control Module J285 again.
NOTE: The defective control module can be established by disconnecting the Steering Column Electronic Systems Control Module J527 and
connecting a different control module.
-
Replace the defective control unit.