audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Driver's Side Airbag Igniter N199 and Front Passenger's Side Airbag Igniter N200 (Top-Mounted Airbag), Removing and Installing|Page 9134 > < Driver's Side Airbag Igniter N199 and Front Passenger's Side Airbag Igniter N200 (Top-Mounted Airbag), Removing and Installing|Page 9132
Page 1
background image

Air Bag: Service and Repair
Rear Side Airbag (Non-Foldable Backrest), Removing and Installing

Rear Side Airbag (Non-foldable Backrest), Removing And Installing

Special tools, testers and auxiliary items required

-

Vehicle Diagnosis, Testing and Information System VAS 5051 A

-

Closing pliers VAS 6273

CAUTION:  Observe safety precautions for work on airbags.

1

-

Zip fastener

2

-

Driver-side and passenger-side rear side airbags
-

Removal:

-

Disconnect the battery ground (GND) strap.

-

Remove rear seat bench: Vehicles through 10.04, vehicles from 11.04.

-

Remove rear seat backrest.

-

Pry out side clamping strips - 3 - using a screwdriver.

-

Pry out lower clamping strip - 9 - using a screwdriver.

Driver's Side Airbag Igniter N199 and Front Passenger's Side Airbag Igniter N200 (Top-Mounted Airbag), Removing and Installing|Page 9134 > < Driver's Side Airbag Igniter N199 and Front Passenger's Side Airbag Igniter N200 (Top-Mounted Airbag), Removing and Installing|Page 9132