audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Clutch Master Cylinder and Slave Cylinder, Notes on Removing and Installing|Page 6315 > < Clutch Master Cylinder and Slave Cylinder, Notes on Removing and Installing|Page 6313
Page 1
background image

Clutch Master Cylinder: Service and Repair
[012/01W/0A9] 5 Spd. M/T FWD

5 SPD. M/T 012/01W FWD

Master cylinder, removing and installing 

Special tools, testers and auxiliary items required 

^

3094 Hose clip

^

VAG 1922 Pliers

Removing 

-

Remove rubber seal from plenum chamber in direction of arrow.

-

Remove cover -1-over plenum chamber.

-

Check whether an encoded radio is installed. If so, obtain anti-theft code.

CAUTION:  On vehicles equipped with Audi Telematics by OnStar(R) switch-off the emergency (back-up) battery for the Telematic/Telephone 
Control Module prior to disconnecting the vehicle battery. Switch-on the emergency (back-up) battery after reconnecting the vehicle battery 

-

Disconnect battery ground strap with ignition switched off.

Clutch Master Cylinder and Slave Cylinder, Notes on Removing and Installing|Page 6315 > < Clutch Master Cylinder and Slave Cylinder, Notes on Removing and Installing|Page 6313