S4 V8-4.2L (BHF) (2004)
1. Nut
^
Unscrewing; Refer to Fig. 1
^
Screwing in; Refer to Fig. 15
^
Measuring friction torque; Refer to Fig. 16
^
Securing; Refer to Fig. 17
2. Flange for drive shaft
^
Pulling off; Refer to Fig 1"
^
Installing; Refer to Fig. 14
3. Sealing ring Pulling out; Refer to Fig. 3 Tapping in; Refer to Fig. 13
4. O-ring Replace Insert with gear oil; Refer to Fig. 12
5. Inner race for small taper roller bearing 1) Pressing out drive pinion; Refer to Fig Pressing on; Refer to Fig. 11
6. Outer race for small taper roller bearing 1) Pulling out; Refer to Fig. 5 Pressing in; Refer to Fig. 10
7. Spacer sleeve 1)
^
Replace
8. Final drive housing 1)
9. Shim "ST' Note thickness Adjustment overview
10. Outer race for large taper roller bearing 1) Tapping out - Fig 1 Inserting - Fig. 9
11. Inner race for large taper roller bearing 1)
12. Drive pinion)
^
Is mated with ring gear, replace together as a set