S4 V8-4.2L (BHF) (2004)
![background image](/audi/s4/v8-4.2l_(bhf)/Page-2391005.png)
Fig. 1 Removing nut for drive pinion
-
Secure final drive on a repair stand.
-
Screw in two hexagon nuts M8 x 30 -A-.
-
B - Socket, long A/F 36
-
When the nut is loosened the final drive must be supported (e.g. with universal gearbox mounting 1359/2 in conjunction with engine/gearbox lifter
VAG 1383 A).
Fig. 2 Pulling flange for drive shaft off drive pinion
-
Screw two hexagon nuts M8 x 30 -A- into the flange.
Fig. 3 Pulling out seal for flange for drive shaft