S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
-
Unbolt bracket -arrows- for plug connectors on bulkhead and move clear to side.
-
Unbolt Hall sender housing (10 Nm).
-
Unscrew bolt securing Hall sender rotor (20 Nm) and carefully pry off rotor using a screwdriver.
-
Remove cover panel from cylinder head cover (cylinder bank 4-6).
-
Release hose clamp -arrow-.
-
Remove upper section of intake pipe -1-.
-
Disconnect hose -2-.
-
Plug lower section of intake pipe.
-
Disconnect hose -1- (arrow).
-
Unscrew bolt securing toothed belt guard from cylinder head cover.
-
Pull plug connectors off ignition coils.